Krazie Sj
09-01-2009, 10:12 AM
So I've posted this on another forum, but can't hurt to put it here too for some local help.
If the other dudes in line for Nathan's procomps get there before I do I might need to go about buying some new ones. That being said, I have no idea where in Calgary or even Canada to get them other than Ebay.
So in my search for new tires, if the price is right, I may just forgo getting spacers and just buy new wheels after all anyways. I know *expletive deleted* all about after market wheels. All I know is that to clear 285's I'll need a 16x? with 0 to -12 offset and 4.5" backspacing.
Can I get 0 off set to clear the UACs? Will I be needing to shave my calipers down to get them to fit? They have 16x8 or 16x9 tires. I'm presuming that's how wide the rim actually is where the tire is seated on there. Will that inch make a difference when I get tires? Or will the tires fit regardless?
I don't really go for the bling bling tires. Here are a few I found that I don't mind. If anyone else has any recommendations for brands of wheels I'd be more than happy to hear you out. Just so long as they aren't $400 a wheel. Honestly, I don't really want to spend more than $900 for wheels at all.
If I have -12 versus 0 offset will that make it less likely to rub?
http://www.allprooffroad.com/images/stories/Tacoma/trailarmor/05bumpers/front/sheetmetalc600x400.jpg
http://www.kxwheels.com/images/wheels/419-0-339x327.jpg
http://www.kxwheels.com/images/wheels/437-0-339x327.jpg
Thanks in advance for any help.
If the other dudes in line for Nathan's procomps get there before I do I might need to go about buying some new ones. That being said, I have no idea where in Calgary or even Canada to get them other than Ebay.
So in my search for new tires, if the price is right, I may just forgo getting spacers and just buy new wheels after all anyways. I know *expletive deleted* all about after market wheels. All I know is that to clear 285's I'll need a 16x? with 0 to -12 offset and 4.5" backspacing.
Can I get 0 off set to clear the UACs? Will I be needing to shave my calipers down to get them to fit? They have 16x8 or 16x9 tires. I'm presuming that's how wide the rim actually is where the tire is seated on there. Will that inch make a difference when I get tires? Or will the tires fit regardless?
I don't really go for the bling bling tires. Here are a few I found that I don't mind. If anyone else has any recommendations for brands of wheels I'd be more than happy to hear you out. Just so long as they aren't $400 a wheel. Honestly, I don't really want to spend more than $900 for wheels at all.
If I have -12 versus 0 offset will that make it less likely to rub?
http://www.allprooffroad.com/images/stories/Tacoma/trailarmor/05bumpers/front/sheetmetalc600x400.jpg
http://www.kxwheels.com/images/wheels/419-0-339x327.jpg
http://www.kxwheels.com/images/wheels/437-0-339x327.jpg
Thanks in advance for any help.