E-Locker Swap

[Sprockett]

Hadn't put much time into thinking about this as the suspension is still not here. However, I noticed last night that the ebrake cable setup is different from what's on my truck to what's on the axle.

My current e-brake cable has swing arm mount to on the drivers side and the 2003 e-locker axle has it on the passenger. The e-locker axle of course has the cable cut. Is the easiest thing to do order a new ebrake cable from an 03 e-locker truck? Or should I be thinking to cut off and reweld on the mounts on the opposite side?

Also, what should I do with my LSPV?

[Sprockett]

Ok, just happened to be driving by the dealer so went into the check price on a cable. The front cable is the same part from 2001-2004 but the rear cable changed in 2003. So, I should be able to just buy a new rear cable and connect it too my existing front...the cost is like $145 :o

Still seems like less work then trying to get my existing cable to work? Am I missing something?

Thanks,

[RiceFarmer]

You may want to read this article Ryan.
http://www.off-road.com/trucks4x4/article/articleDetail.jsp?id=186295